Simagic has crafted a reputation for being one of the front-running sim racing equipment providers in the marketplace, the firm having been founded by a group of engineers who wanted to build the best-performing and meticulously built gear around. The company was established in 2018, and since then has developed a wide range of different sim racing hardware and software.
Alongside a range of different wheelbases and steering wheels, Simmagic also offers pedal sets and external accessories like handbrakes and shifters. For those looking to get involved in the Simmagic ecosystem, or who are wondering if they should pull the trigger on the brand’s equipment, then you’ll be interested in what settings you’ll need to get started.
This guide will run you through the best force feedback settings to start off with in iRacing with Simagic’s Alpha Evo range of wheelbases, the brand’s new Halo line of wheelbases.
Setting Up Your Simagic Wheelbase In iRacing
Step 1: Ensure that your chosen Simagic wheelbase, as well as corresponding peripherals like your pedals or shifter/handbrake, are plugged into the back of the wheelbase. If you’re using equipment built by different manufacturers, make sure they are plugged into the rear of your PC.
Step 2: Once this is done, you’ll need to download Simagic’s SimPro 2 software from Simagic’s website. SimPro 2 allows access to all the different FFB settings you’ll need to dial in your setup so that you can focus instinctively on your driving.
Step 3: After SimHub 2 is installed correctly, and your wheelbase and other kit are correctly connected to your PC, you’ll be able to play around with your settings. The cheapest Simagic Alpha Pro you can get is the 9Nm version, which will set you back $399. The mid-range 12Nm fixture comes in at $549, while the range-topping 18Nm wheelbase demands $699 from your wallet. Bear in mind that you’ll need to pay tax and shipping depending on the country you live in.
Simagic SimPro 2 Software Settings
Set these parameters before entering iRacing in the SimPro 2 software. First, click the Devices tab on the left-hand side of the SimPro 2 UI, before then hitting the ‘Expand Presets’ tab on the top right of the screen. From there, select ‘iRacing’ in the drop-down menu, and then tweak the values afforded to you as laid out in the table below. More adept drivers may want to make different presets relating to different cars within iRacing.
| Settings | Recommended Value |
| Angle | 900° (iRacing’s auto end stop will be used, wheel needs to be calibrated with iRacing software first) |
| Hard Lock Angle | 900° |
| Limit Strength | Normal |
| Force Feedback | 100% |
| Filter Level | 5 |
| Wheel Rotation Speed | 50 |
| Feedback Detail | 12 |
| Dynamic Prediction Level | 0 |
| Mechanical Damper | 35% |
| Mechanical Friction | 5% |
| Mechanical Inertia | 0% (If you like a heavy wheel increase this) |
| Slew-Rate Control | 25 |
iRacing In-Game Settings (Per Wheelbase)
Once you’ve got your wheel settings in the RacePro software set properly, you’ll need to further dial things in per wheelbase within iRacing to get the best results. As each outputs a different amount of torque, you’ll need to set the right level of strength to ensure you don’t suffer any clipping, while also preserving as much detail as possible.
If you fancy improving your driving along with your FFB settings, why not try Coach Dave Delta, which offers telemetry and AI Coaching in one place.
- Sports, Formula & Oval iRacing Setups
- Race Telemetry - Brake, Throttle & Racing Lines
- Corner by Corner AI Coaching To Gain Seconds
- iRacing Sub, Asetek & Coaching Discounts
Simagic Alpha Evo 9Nm iRacing Settings
| Setting | Recommended |
| Strength | 1.8 (Use as starting point, use iRacing’s Auto FFB function in F9 Black Box to dial it in per car) |
| Wheel Force | 9 Nm |
| Intensity | 50% |
| Smoothing | 0% |
| Damping | 0% |
| Min Force | 0% |
| Reduce Force When Parked | On |
The 9Nm Alpha Evo is the lowest-powered of the range, and will thus be most susceptible to clipping should you set the in-game strength setting too high. Starting off lower will be your best bet, as you’ll have a smaller overhead and range before running into trouble.
Simagic Alpha Evo 12Nm iRacing Settings
| Setting | Recommended |
| Strength | 2.2 (Use as starting point, use iRacing’s Auto FFB function in F9 Black Box to dial it in per car) |
| Wheel Force | 12 Nm |
| Intensity | 50% |
| Smoothing | 0% |
| Damping | 0% |
| Min Force | 0% |
| Reduce Force When Parked | On |
The 12Nm of torque the mid-table Alpha Evo provides is a nice middle ground, and should provide more than enough grunt for most sim racers to enjoy. That said, those who like a strong wheel could still run into problems with clipping, so don’t go crazy with the strength setting. Unless you’re driving an older vehicle that lacks power steering, the 12Nm should accurately portray the vast majority of racers.
Simagic Alpha Evo 18Nm iRacing Settings
| Setting | Recommended |
| Strength | 3.5 (Use as starting point, use iRacing’s Auto FFB function in F9 Black Box to dial it in per car) |
| Wheel Force | 18 Nm |
| Intensity | 50% |
| Smoothing | 0% |
| Damping | 0% |
| Min Force | 0% |
| Reduce Force When Parked | On |
For pilots looking to find that Nth degree of realism, the 18 Nm wheelbase will be the one to have. The extra overhead and fidelity it provides will come in handy when it comes to driving cars that lack power steering, as you can have it realistically heavy without losing detail. You’ll struggle to run into clipping worries here, so you can be more liberal with the strength setting from the outset.
Additional Tips
- Make sure to select ‘Linear Mode’ in the iRacing settings, as this will provide the FFB best accuracy for DD wheelbases.
- If you suffer from clipping despite using the auto iRacing setting, then turn down the Force Feedback level in the SimPro 2 UI.
The settings laid out for the three flavors of Simagic Alpha Evo available will provide you a good foundation with which to jump into iRacing and make the most of the power you have at your fingertips, without suffering from clipping or leaving some extra force on the table. These values may need to be tweaked slightly to ensure you achieve the feeling needed to be faster and more consistent. Each parameter was worked out using recommended manufacturer settings, community-derived values, and in-house confirmation.
Additional iRacing Setup Guides:
If you’re looking for additional guides to get started with iRacing and your particular setup, please check out the following links:
- iRacing Moza Wheel Settings
- Simucube 2 Pro iRacing Settings
- Asetek iRacing Settings
- Ultimate iRacing Setup Guide
- iRacing HUD Setup Guide
- Sports, Formula & Oval iRacing Setups
- Race Telemetry - Brake, Throttle & Racing Lines
- Corner by Corner AI Coaching To Gain Seconds
- iRacing Sub, Asetek & Coaching Discounts
